In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks which you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the home, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it’s actually quite simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will have to cut around the edge of the mask so you get something that looks like a cone. The main thing here is to be realistic with what type of paper plate which you’re using.
Then you’ll need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can ensure that nothing will leak once you put the mask on. Make sure that the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so you can work your way round it before moving onto the cheapest healthiest dog food other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck into your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you are done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to glue the mask on your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Be certain it’s quite powerful and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged securely onto the surface of your dog. Don’t make the folds too big or else it might look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain the ears are level and be certain it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask because your dog protection, you’ll need to do some sanding to be sure that it’s safe on your dog. You can do it by sanding off any excess paper that may have been eliminated from your mask.